TMDE3
Digital Microwave Link
  
 

 

General. The TMDE Series professional encoders perform video and audio MPEG-2 4.2.0 compression in accordance with DVB or ATSC Digital Television Standards.

Flexible architecture. The TMDE Series encoders are designed to be easily hardware configurable to meet the most demanding requirement for Digital Television Broadcasting Networks.They can be equipped with up to 4 internal plug-in encoders, with an high performance built-in multiplexer and with the possibility to have various input standard interfaces (composite, SDI digital (optional), S-VHS, video inputs; analog balanced, AES/EBU digital (optional), SP-DIF (optional) audio inputs).
Output transport stream interface is DVB-ASI standard (LVDS available as option).

High capacity. The TMDE Series encoders can be equipped to perform the MPEG-2 compression and the correspondent multiplexing of up to 4 video and 8 audio programs. For more video and audio programs it is possible to multiplex more MDE encoders with an external ASI multiplexer.

Multistandard. The TMDE Series encoders support PAL, NTSC, SECAM video signals.

Fully configurable. The TMDE Series encoders are fully configurable locally with a complete and easy to use front panel LCD display or remotely with a specific PC software (enclosed). All important parameters like encoders audio and video bit rates, encoder code rates, video resolution, audio sampling frequency and many others are instantly programmable to match the digital networks needings.

Compact design. The TMDE Series encoders are realized into a very compact 19” standard rack, 1 U high.

 

 
   
 
     
 
 
TMDE3
Digital Microwave Link
  
     
 

 
TMDT, TMDR, TMDR Series Parametric Table
UP-CONVERTERS TMDT Series

DOWN-CONVERTERS TMDR Series

 REPEATERS FREQUENCY RANGE RF POWER (DBM)(BPSK,QPSK, 8PSK) RF POWER (DBM)
(16 QAM)
           
 TMDT 2/28  TMDR 2  TMDR 2/28  1.3 - 2.7 GHz  28  25
 TMDT 2/32  TMDR 2  TMDR 2/32  1.3 - 2.7 GHz  32  29
 TMDT 2/38  TMDR 2  TMDR 2/38  1.3 - 2.7 GHz  38  35
           
 TMDT 4/26  TMDR 4  TMDR 4/26  4.2 - 4.8 GHz  26  23
 TMDT 4/32  TMDR 4  TMDR 4/32  4.2 - 4.8 GHz  32  29
 TMDT 4/35  TMDR 4  TMDR 4/35  4.2 - 4.8 GHz  35  32
           
 TMDT 8/16  TMDR 8  TMDR 8/16  5.4 - 9.9 GHz  16  13
 TMDT 8/26  TMDR 8  TMDR 8/26  5.4 - 9.9 GHz  26  23
 TMDT 8/32  TMDR 8  TMDR 8/32  5.4 - 9.9 GHz  32  29
 TMDT 8/35  TMDR 8  TMDR 8/35  5.4 - 9.9 GHz  35  32
           
 TMDT 10/16  TMDR 10  TMDR 10/16  10.0 - 12.7 GHz  16  13
 TMDT 10/26  TMDR 10  TMDR 10/26  10.0 - 12.7 GHz  26  23
 TMDT 10/32  TMDR 10  TMDR 10/32  10.0 - 12.7 GHz  32  29
 TMDT 10/35  TMDR 10  TMDR 10/35  10.0 - 12.7 GHz  35  32
           
 TMDT 14/26  TMDR 14  TMDR 14/26  12.8 - 15 GHz  26  23
 TMDT 14/32  TMDR 14  TMDR 14/32  12.8 - 15 GHz  32  29
 TMDT 14/35  TMDR 14  TMDR 14/35  12.8 - 15 GHz  35  32

TMDT, TMDR, TMDR series Up & down converters characteristics
IF frequency 70 MHz for TX, L-band (950 - 2250 MHz ) for RX (others on request)
Output power tolerance (TMDT & TMDR series) ± 1 dB
RF impedance 50 W

Frequency stability:
For frequencies below 3 GHz ±10 ppm
For frequencies above 3 GHz ± 45 ppm (±10 ppm on request)
Amplitude frequency response (fc ± 10 MHz) ± 0.25 dB
Group delay response (fc ± 10 MHz) ± 2 ns
Receiver noise figure < 5 dB
Image rejection > 70 dB
Receiver sensitivity (for B.E.R.<10exp-5) <-90 dBm

DQM IF Modulator & Encoder Characteristics
Modulation QPSK (DVB-S compliant) (8PSK or 16QAM on request)
IF Output Frequency 70 MHz (L-band on request)
Output level + 5 to -15 dBm adjustable
Output Connector BNC
Output Impedance 50/75 W selectable
Bit-Rate Up to 48 Mbit/s
Code Rate 1/2,2/3,3/4,5/6,7/8 selectable
Symbol Rate Up to 30 MS/s
Channel Bandwidth Dependent on the symbol rate setting (from 3 to 40 MHz)
Video Input Standard PAL-NTSC-SECAM selectable
Analog Video Input CVBS composite (BNC) and S-VHS (Y-C)
Analog Video Input Level 1 Vpp ± 6 dB
Digital Video Input (optional) SDI standard
Analog Audio Input Balanced (DB9 Connector)
Analog Audio Input Level -10 to +16 dBm
Digital Audio Input AES-EBU (DB9 Connector)
Video encoding format MPEG-2 4:2:0 MP@ML (4:2:2 on request)
Audio encoding format MPEG-1, Layer 2, up to 448 kbps
Transport Stream Output LVDS, optional ASI
Transport Stream Input (optional) ASI
Remote Control (option) RS 232

DQD IF Demodulator & Decoder Characteristics
Modulation QPSK (DVB-S compliant) (8PSK or 16QAM on request)
Input IF frequency L-Band (70 MHz on request)
Input level From –65 to –20 dBm
Input connector “F” female
Input impedance 75 Ohm
RF input attenuator 0/20 dB programmable
Symbol rate From 2 to 45 MS/s
Code Rate 1/2,2/3,3/4,5/6,7/8 selectable
Transport stream interface (optional) LVDS
Video Output Standard PAL-NTSC-SECAM selectable
Analog Video Output CVBS composite (BNC)
Analog Video Output Level 1 Vpp adjustable
Digital Video Output (optional) SDI standard
Analog Audio Output Balanced
Analog Audio Output Level 0 to +16 dBm
Transport Stream Output LVDS (optional ASI)
Remote Control (optional) RS 232

General operating conditions:
AC operating voltage 115/208/230/240 Vac±15%, 47 to 62 Hz singlephase
DC operating voltage (optional) 24 Vdc±20%
Operating temperature range -5° ÷ +45° C
Humidity 95% max

 
 
 
   

ITEL S.r.l.
TELECOMUNICATIONS AND BROADCASTING SERVICES
Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY
Tel. +39 0434 997667 - Fax. +39 0434 997687